Cutting Blades

TYPE HS0-N

Cutting blade to cut fine fabric and thin cords.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type R

Cutting blade of higher capacity, for separating stronger fabrics, strings and ropes up to 15mm diameter.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type HG

Melting tip for smothing and deburring.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

Type F-2

For cutting ropes and belts.

For units: HSG-0, HSG-0-electronic,

HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type G-90

Blade to cut ropes and belts up to 60mm in width.

For units: HSG-1-VW, HSG-03-VW, HSG-3-VW, HSG-4-VW, HSG-4-VW-mA.

 

Type R-1

Blade to separate ropes up to Ø 50mm.

For units: HSG-3-VW, HSG-4-VW, HSG-4-VW-mA, HSG-0-electronic.

 

Type HS-S

To cut and seal the edges of stronger fabric, such as awnings and sails which come in larger widths.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type HS-SG

To cut and seal the edges of stronger fabric, such as awnings and sails which come in larger widths.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type V

Cutting blade, for cutting stronger fabrics, strings.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type VST

For units: HSG-1-VW, HSG-03-VW, HSG-3-VW, HSG-0-electronic.

 

Type STA

For units: HSG-3-VW

 

Type F-3

For cutting small ropes.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Melting point Type F

To joint cord or rope ends

For units: HSG-3-VW, HSG-4-VW, HSG-4-VW-mA.

 

Heating fork Type KM

To seal the borders of woven felts and heavier material.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type RU Ø 3-10 mm

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type RU Ø 11-160 mm

For units: HSG-3-VW

 

 

Type OV

For unit: HSG-3-VW

a = min. 3mm
b = min. 4mm
a = max. 100mm
b = max. 150mm

 

 

Type RE

For unit: HSG-3-VW

a = min. 4mm
b = min. 8mm
a = max. 100mm
b = max. 110mm

 

Type HR

For unit: HSG-3-VW

r = max. 50mm

 

Type WI

For unit: HSG-3-VW

a = max. 50mm
a = min. 15°
max. 180°

 

Type H

Melting tip for smothing and deburring.

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.



 

Type R-Therm

For unit: HSG-3-Therm

 

Type 7

For unit: HSG-7

 

Type V-Therm

For unit: HSG-3-Therm

 

 

 

 

Type C

For cutting of styrofoam

For units: HSG-0, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type N-1

To cut grooves into styrofoam

r = max. 10 mm
For unit: HSG-0

r = max. 15 mm
For units: HSG-OE, HSG-0-electronic, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type N-2

To cut grooves into styrofoam

a = max. 20 mm
r = min. 1mm
For unit: HSG-0


a = max. 30 mm
r = min. 1mm
For units: HSG-OE, HSG-0-electronic, HSG-1-VW, HSG-03-VW, HSG-3-VW.

 

Type R-50mm

Cutting blade of higher capacity, for separating stronger fabrics, strings and ropes up to 35mm diameter.

For units: HSG-1-VW, HSG-03-VW, HSG-3-VW, HSG-4-VW, HSG-4-VW-mA, HSG-0-electronic.

 

 

Note: There are various cutting blades available suitable for different materials and applications. This webside unfortunately can only give brief information. Therefore - contact us and let us know what kind of problems you are dealing with. We will do our best to find the optimal solution for you. We also do trial cuttings with your fabric without any obligation on your part.

Please remember to indicate the required diameter of a section to cut out (outer Ø of blade for holes or inner Ø of blade for circular rounds). Depending on the type of blade or application, we need to know the required lengths a and b, radius r  and angle a , when placing your order.