Search

Rope & webbing cutter

Type HSG-G2S-50/80/100-E

With our thermal cutting system it is possible to cut synthetic fabric, such as belts, bands and ropes to length. An electric heated blade separates, in one phase of operation, the material by heat and seals the cut edges to avoid fringing of the cut edge.

Compressed air
6 bar
Power input
800 VA
Supply voltage
230 Volt - 50/60 Hz

Description HSG-G2S-50/80/100-E

With our thermal cutting system it is possible to cut synthetic fabric, such as belts, bands and ropes to length. An electric heated blade separates, in one phase of operation, the material by heat and seals the cut edges to avoid fringing of the cut edge.

For heat cutting we will use our proven cutting system with two blades towards each other without base.

Full automatic function:

- Material pull of from a roll or out of a barrel.

- Length measuring.

- Piece counter.

- Cutting.

- Material turn off. 

Technical data

HSG-G2S-50/80/100-E
Specification Value
Control Control-Panel (Siemens KTP400)
Conveying speed 0 - 50 m/min. infinitely adjustable
Movement of the blade(s) Pneumatic
Belt width 50 - 80 - 100 mm (depending of type)
Belt thicknesses 5mm max.
Rope diameter 10mm max.
Length measure 20mm - 1000m, adjustable by the mm, indicated digital.
Piece counter Total number can be programmed, machine stops operation when set number has been cut. Separate indication of pieces to cut in total and already cut pieces during operation, indicated digital.
Operation Fully automatic, machine stops at end of fabric flow or malfunction.
Cutting element Electric direct heated blade. Heating time approx. 90 sec. to 600°C.
Control Programmable controller (PLC/SPS).
Temperature 100 - 600°C. infinitely variable.
Supply voltage 230 Volt - 50/60 Hz
Power input 800 VA
Compressed air 6 bar
Dimensions 700mm x 640mm x 615 mm (W x H x D) depending on type.
Weight approx. 80 kg; depending on type.

Optional additional equipment

  • Cold cutting with scissors system
  • Uncoiling if required

Downloads – HSG-G2S-50/80/100-E

Interested in the HSG-G2S-50/80/100-E?

Let our experts advise you – we will recommend the right cutting blade and make free sample cuts.