Type HSGM-ETC-250-S
Description
Table model for vertical and diagonal cutting of styrofoam material.
Following possibilities:
Vertical cuts and diagonal cuts up to an angle of 45°. Cutting height up to 500 mm (20’’).
The table model for cutting of styrofoam material is used in the building and packing industry.
The complete zinc plated working table is a steel frame with a sheet steel table top.
The cutting temperature is continuously adjustable by means of an adjusting knob. A transformer heats the hot wire in 10-15 secs. to approx. 600°C (1110°F). The power transformer is located under the operating plate.
The supports (clamps which hold the hot wire) are disconnected safely from the mains by means of a safety isolating transformer, according to the VDE 0570 / EN 61558 rules.
Technical Description
| Cutting Element: | Hot wire 0.8 mm Ø | |
| Cutting height: | max. 500 mm (20’’) | |
| Cutting temperature: | 600°C (1110°F) adjustable | |
| Measure: | 880 x 1460 x 800 mm (34.7’’ x 57.5’’ x 31.5’’) | |
| Working level: | 880 mm (34.6’’) | |
| Voltage: | AC 230 V (AC 110 V) | |
| Frequency: | 50-60 Hz | |
| Power input: | 400 Watt max. | |
| Weight: | 40 kg (88 lb) |
